https://dankbuild.com/ ESP32-S3 build-logs with the full bill of materials, wiring and firmware, written so you can rebuild them — plus four bench parts: three STLs, one browser-generated. en Sat, 08 Aug 2026 00:00:00 GMT https://dankbuild.com/electronics/esp32-bench-parts/ https://dankbuild.com/electronics/esp32-bench-parts/ Sat, 08 Aug 2026 00:00:00 GMT A bench plate, a fit gauge and a jumper-wire comb on breadboard pitch: three STLs, plus a parts tray generated in the browser. Nothing here has been printed. https://dankbuild.com/electronics/measuring-a-dev-board-for-3d-printing/ https://dankbuild.com/electronics/measuring-a-dev-board-for-3d-printing/ Sat, 08 Aug 2026 00:00:00 GMT Sizing a printed part around a board whose dimension you cannot source: a step gauge instead of a guess, and four code checks before anything is printed. https://dankbuild.com/electronics/hello-esp32/ https://dankbuild.com/electronics/hello-esp32/ Wed, 17 Jun 2026 00:00:00 GMT The two USB-C ports, the right board target, and the ordered checks for a dark LED — the flashing gotchas behind a nine-line ESP32-S3 blink sketch.